|
The SE, codenamed Chloe, is a modified Timex TC2048.
The modifications were specified by
Andrew Owen and designed and implemented by Jarek Adamski.
Within each section, you may find links to additional information elsewhere in this FAQ, or to other reference documents.
Technical Specifications:
The technical specifications for the ZX Spectrum SE are;
- Codename: Chloe.
- I/N: TC2280.
- CPU: Z80A @ 3.528Mhz.
- Total RAM: 280K.
- Video RAM: 27K.
- ROM: 64K (32K active, 32K passive)
- Sound: AY-3-8912.
- Keyboard: Cherry PS/2 Notebook.
- Mouse: Amiga 2-Button.
- Joystick: Kempston.
Hardware:
For most people, the final specification of the ZX Spectrum SE is probably not a concern, since it is just one potential system
to run Sinclair Extended Basic on - although I would love to see it supported by emulators. If you were holding out for all those
new graphics modes I dreamed up, or if you just want a modern Z80 based machine right now, then I would recommend the Sprinter from
Peters Plus Ltd. I am working with Peters to ensure that
Sinclair Extended Basic will run on the Sprinter. If you want to build your own Spectrum from off-the-shelf components then you
should look at Mike Wynne's
SpeccyBOB. In theory it should be possible to build a ZX Spectrum SE based on
the SpeccyBOB schematics, and it will support Sinclair Extended Basic via a drop-in EPROM.
If you got very excited when Zilog announced the eZ80 then you should keep an eye on the development of
Richard Kelsh's Sparky project. It uses its own 24-bit version of Basic, based in part on Sinclair Extended Basic. I thought I'd be the
first to use Sinclair Extended Basic on genuine hardware but Garry Lancaster, designer of the ZX Spectrum +3e, beat me to it. I'm
working with him to ensure Sinclair Extended Basic supports ResiDOS - the operating system of the ZXATASP IDE interface. We are
also looking at the possiblity of merging aspects of the +3e and Sinclair Extended Basic.
Finally, if you have an old Spectrum and you want to give it a bit more pow, go and visit Jarek Adamski's website, buy original
hardware, peripherals and software from Sintech, and read comp.sys.sinclair and, if you read Spanish, es.comp.sistemas.sinclair.
There are 7 subsections available:
CPU,
Memory,
Mouse/Joystick,
PSU,
ROM,
Sound Chip and
ULA.
- CPU
The main processor in the SE appears to run at 3.528 MHz as opposed to 3.5 Mhz on the 48K Spectrum. Scanline timings
are unaffected because the SCLD uses counters rather than time-loops. Just like a normal 48K Spectrum there are 224
T-states per scanline and 312 scanlines before the television picture.
- Memory
The SE combines the RAM paging systems of the Timex TS2068 with the ZX Spectrum 128 and then adds another 16K to that.
This means it uses two different systems to access its full 272K of RAM. Jarek installed his 128 compatibility upgrade to take the
RAM to 144K and then installed a 128K SRAM connected to the Timex memory management unit.
The Timex Horizontal MMU sees the RAM as three banks of memory; HOME, DOCK, and EX banks.
The HOME bank is the normal Spectrum memory area. The top 32K is uncontended but the 16K screen area below that is
contended. DOCK and EX banks are overlaid on this bank, but paging over the screen area does not change the RAM used by the
ULA. This does mean it is possible to set up a screen and page it out.
Memory is paged in 8K banks from either the DOCK or the EX bank, but these banks are mutually exclusive - you cannot page in a
bank from both simultaneously. Bit 7 of port #FF determines which bank to use (0=DOCK, 1=EX-ROM). Port #F4 determines which
banks are to be paged in with each bit referring to the relevant bank (0-7 or 0'-7'). When memory is being paged, interrupts should
be disabled and the stack should be in an area which is not going to change.
On a TC2048, BASIC is contained in the 16K ROM area and banks 0-7 and 0'-7' are not normally available, while on a TS2068 part of
the BASIC is stored in an 8K ROM in bank 0' and cartridges plugged into the dock use banks 0-7. On the SE each of these banks is
connected to 64K of RAM, providing an additional 128K in addition to the base RAM.
The contended memory timings for the SE are unknown but should be similar to that for the 48K machine, except that the pattern starts
at a different number of T-states after the interrupt, than the usual 14335. Odd banks in the 128 scheme are contended.
Reading this port returns the last byte sent to it.
The TS2068 only has 48K of base RAM, but the SE has also been expanded to use a variation of the ZX Spectrum 128 paging system to
increase the base RAM to 144K. This means that the HOME bank is paged like a normal Spectrum 128, except that there is an additional
bank at 8000h where you would expect to find Bank 2. This does not appear to cause any problems with existing commercial software,
although some demos (such as 'Real Action') are affected, but it provides some more memory.
The HOME bank is paged in the same way as the Spectrum 128, using port #7FFD.
D0-2: RAM bank (0-7) to map into memory at C000h.
D3: Select video area to be used by ULA; Bank 5 or Bank 7.
D4: Select ROM; 0 - Editor or 1 - Basic.
D5-7: Not used.
HOME RAM banks 1,3,4,6 and most of 7 are used for the RAM disk in 128 Basic; the rest of 7 contains editor scratchpads.
The EX and DOCK banks are paged by the horizontal MMU.
HOME
FFFFh +---------+---------++---------++--------+--------+--------+--------+---------+--------+---------+
| Ex 7 | Dock 7 || Bank 0 || Bank 1 | Bank 2 | Bank 3 | Bank 4 | Bank 5 | Bank 6 | Bank 7 |
| | || || |(also at| | |Screen 0'| |Screen 1'|
E000h +---------+---------+| || |8000h on| | +---------+ +---------+
| Ex 6 | Dock 6 || || |Spectrum| | | | | |
| | || || | 128) | | |Screen 0 | |Screen 1 |
C000h +---------+---------++---------++--------+--------+--------+--------+---------+--------+---------+
| Ex 5 | Dock 5 || Bank 8 | Any one of these pages may be switched in.
| | || |
A000h +---------+---------+| |
| Ex 4 | Dock 4 || |
| | || |
8000h +---------+---------++---------+
| Ex 3 | Dock 3 || Bank 5 |
| | ||Screen 0'|
6000h +---------+---------++-- -- -- +
| Ex 2 | Dock 2 || |
| | ||Screen 0 |
4000h +---------+---------++---------++--------+
| Ex 1 | Dock 1 || ROM 0 || ROM 1 | Either ROM may be switched in.
| | || || |
2000h +---------+---------+| || |
| Ex 0 | Dock 0 || || |
| | || Editor || Basic |
0000h +---------+---------++---------++--------+
The EX and DOCK banks
are mutually exclusive.
Pages from these banks
may be switched in over
the HOME bank.
Owing to the use of two completely different paging systems there are certain hardware limitations on which banks can be paged in.
The first side effect is that the odd (slow) banks of the 128 paging system have higher priority than the DOCK and EX banks.
The memory map looks like this:
bank number outed to #7FFD
0 1 2 3 4 5 6 7
HOME RAM0 RAM1 RAM2 RAM3 RAM4 RAM5 RAM6 RAM7
DOCK DOCK RAM1 DOCK RAM3 DOCK RAM5 DOCK RAM7
EXROM EXROM RAM1 EXROM RAM3 EXROM RAM5 EXROM RAM7
^
'---selected in section D
So, to use the DOCK or EX memory in C000h...FFFFh, one of the even banks (0,2,4,6) from the 128 paging system must be selected.
If the selected bank is 1,3,5, or 7 this bank will appear instead of DOCK or EX memory. This concerns bits 6 and 7 of the MMU port #F4.
The second side effect is that bits 2 and 3 of the MMU port #F4 also apply for those odd (slow) banks in section D. So when you select
one of the odd banks (for section D, using port #7FFD), and then switch section B (#4000..#7FFF) to DOCK/EX, you will have also the
DOCK/EX in section D.
The whole memory map is described below. The DOCK/EX memory is marked as X0...X7, because you can only have DOCK or EX at
a time (bit 7 of #FE port). The number means 1/8 part of 64kB, corresponding to bit in #F4 port.
The sections are marked as AL, AH, BL, BH, CL, CH, DL, DH. Every one means 8kB.
- In case of HOME selected
OUT 244,BIN 00000000
bank number outed to #7FFD
section 0 1 2 3 4 5 6 7
DH 7 RAM0H RAM1H RAM2H RAM3H RAM4H RAM5H RAM6H RAM7H
DL 6 RAM0L RAM1L RAM2L RAM3L RAM4L RAM5L RAM6L RAM7L
CH 5 ----------------- RAM8H only ------------------
CL 4 ----------------- RAM8L only ------------------
BH 3 ----------------- RAM5H only ------------------
BL 2 ----------------- RAM5L only ------------------
AH 1 --------------- ROM0H or ROM1H ----------------
AL 0 --------------- ROM0L or ROM1H ----------------
- In case of DOCK/EXROM selected (except B section)
This means OUT 244, BIN 11110011 or its 8kB variants like mixed with HOME (other 8kB of each 16kB are HOME) OUT 244,
BIN 10100010 or OUT 244, BIN 01010001; or mixed with DOCK OUT 244, BIN 11110111 or OUT 244, BIN 11111011, this
applies respectively.
bank number outed to #7FFD
section 0 1 2 3 4 5 6 7
DH 7 X7 RAM1H X7 RAM3H X7 RAM5H X7 RAM7H
DL 6 X6 RAM1L X6 RAM3L X6 RAM5L X6 RAM7L
CH 5 ------------------- X5 only -------------------
CL 4 ------------------- X4 only -------------------
BH 3 ----------------- RAM5L only ------------------
BL 2 ----------------- RAM5L only ------------------
AH 1 ------------------- X1 only -------------------
AL 0 ------------------- X0 only -------------------
- In case of DOCK/EXROM selected (in every section) (independency from 7FFD port)
OUT 244, BIN 1111111
section
DH 7 X7
DL 6 X6
CH 5 X5
CL 4 X4
BH 3 X3
BL 2 X2
AH 1 X1
AL 0 X0
- In case of DOCK/EXROM selected (except D section)
This means OUT 244, BIN 00111111 or its 8kB variants (BIN 0x1x1x1x or BIN x0x1x1x1).
bank number outed to #7FFD
section 0 1 2 3 4 5 6 7
DH 7 RAM0H X7 RAM2H X7 RAM4H X7 RAM6H X7
DL 6 RAM0L X6 RAM2L X6 RAM4L X6 RAM6L X6
CH 5 ------------------- X5 only -------------------
CL 4 ------------------- X4 only -------------------
BH 3 ------------------- X3 only -------------------
BL 2 ------------------- X2 only -------------------
AH 1 ------------------- X1 only -------------------
AL 0 ------------------- X0 only -------------------
- PSU
The SE requires a 9V DC supply at 800 mA -ve centre polarity. This is provided via a transformer taking a
230v AC supply at 50Hz. Jarek has modified the LED so it shows red when the PSU is connected and green
when the machine is powered up.
- ROM
Jarek has replaced the standard ROM with a 64K EPROM. Only two pages are visible to the hardware;
- The first is a modified version of the ZX Spectrum 128 editor. A call to the TEST routine in ROM-1 is
replaced with code to reset the Timex ULA.
- The second is an exact copy of the original ZX Spectrum BASIC but has TR-DOS traps in place of the
character set (#3C00..#3FFF is filled with PUSH AF: RST 8: NOP: NOP).
This makes the machine more compatible with existing software titles than the original ZX Spectrum 128. A third
page is exactly as the same as the first and a fourth page is exactly the same as second, but without TR-DOS
traps (it has the character set). The A15 line of EPROM is connected to /M1 of Z80, while the A14 is connected to bit 3
of the #7FFD port latch. The TR-DOS traps allow emulation of TR-DOS by the ZXVGS operating system. Custom ROMs
can be loaded into memory and paged into place using the DOCK or EX banks. Jarek has fitted an external NMI button
for ROMs with a working NMI routine.
- Sound Chip
Jarek has installed an AY-3-8912 sound chip with an added 8K serial EEPROM. Port 14 of the AY is used as an IIC driver
(must work as output). Bit 0 is the SDA (data) line, bit 1 is SCL (clock) of the IIC. The chip mapped to four I/O ports:
OUT (#FFFD) - Select a register 0-14.
IN (#FFFD) - Read the value of the selected register.
OUT (#BFFD) - Write to the selected register.
These ports match the AY chip used in the ZX Spectrum 128.
OUT (#F5) - Select a register 0-14
IN (#F5) - Read the value of the selected register
OUT (#F6) - Write to the selected register
These ports match the AY chip used in the Timex TS2068.
The output is ABC/ACB stereo switchable.
The sound produced by the beeper plays through an internal speaker but is muted when loading or saving to tape.
- ULA
The Spectrum's ULA bug which causes snow when I is set to point to contended memory is also present in the
TS2068 SCLD (ULA) but has been fixed by Jarek by adding an AND gate. He has also fixed a problem with the
SCLD which would produce snow if IM2 was selected. The TS2068 SCLD provides a number of additional screen
modes controlled using port #FF. An unfortunate side effect of this is that a few games, like Arkanoid, which expect
reading #FF to produce screen and ATTR data bytes when the ULA is reading screen memory, will not work because the
value returned will be the last byte sent to the port. The SCLD is also responsible for I/O and unlike a normal Spectrum,
port addresses are fully decoded. This means it is not possible to read the keyboard from alternate addresses which also
causes problems with some games. Port #FF is also used to enable/disable the timer interrupt and select which bank of
memory should be used by the horizontal MMU. The byte to output will be interpreted thus:
D0-2: Screen mode. 000=screen 0, 001=screen 1, 010= hi-colour, 110=hi-res
D3-5: Sets the screen colour in hi-res mode.
000 - Black on white. 100 - Green on magenta.
001 - Blue on yellow. 101 - Cyan on red.
010 - Red on cyan. 110 - Yellow on blue.
011 - Magenta on green. 111 - White on black.
D6: If set disables the generation of the timer interrupt.
D7: Selects which bank the horizontal MMU should use. 0=DOCK, 1=EX.
Screen 0 is the normal screen at the start of video memory. Screen 1 uses the same format but is offset by 8K.
The hi-res screen uses the data area of screen 0 and screen 1 to create a 512x192 pixel screen. Columns are taken alternately
from screen 0 and screen 1. The attribute area is not used. In this mode all colours, including the BORDER, are BRIGHT, and the
BORDER colour is the same as the PAPER colour.
The hi-colour screen uses the data area of screen 0 for its data and the data area of screen 1 for its attributes, giving 2 colours
per 8x1 pixel block. The attribute area is in the same byte order as the data area, which means MLT files, which have the attribute
area in series, must be converted to be displayed.
Bit 6 has the equivalent function of a DI machine code instruction when set or an EI instruction otherwise.
With careful timing it is possible to mix screen modes so you could have a screen where the top half is hi-colour and the bottom
half is hi-res - perfect for text adventures with graphics. Using a similar technique it is also possible to have more than two colours
on a hi-res screen. No commercial software ever did this though.
In addition to these screen modes the ULA can access two separate video areas, just like a Spectrum 128. This is done by using bit
3 of port #7FFD. This gives the ULA a total of 27K of RAM which can be used for up to four standard screen areas or two hi-res or
hi-colour screens.
Port #FE deals with basic I/O. As mentioned before addresses are fully decoded, so whereas on a normal Spectrum every even I/O
address will address the ULA, the SE will only respond to the correct port. The port is decoded as follows:
D0-2: Border
D3: MIC
D4: EAR/beeper
IN: Reads keys (bit 0 to bit 4 inclusive)
#FEFE SHIFT, Z, X, C, V #EFFE 0, 9, 8, 7, 6
#FDFE A, S, D, F, G #DFFE P, O, I, U, Y
#FBFE Q, W, E, R, T #BFFE ENTER, L, K, J, H
#F7FE 1, 2, 3, 4, 5 #7FFE SPACE, SYM SHFT, M, N, B
Software:
Software development is ongoing, with
TS2068 and
ZX Interface II emulators having already been written.
Future Developments:
IDE and RS232 interfaces should be available shortly.
|